What it costs to fit new gutters on a roof in Tallinn
The Abimeister team · Updated · 4 min read
If you are re-roofing or finishing a new build, fresh gutters are usually the last piece before the scaffolding comes down. The price is not a single figure per metre, because roof length, material, the number of downpipes, and how the crew reaches the eaves all move the total. This guide sets out what drives the cost of new gutter installation in Tallinn and Harju county in 2026, so you know what a quote is actually paying for.

What shapes the price of installation
The main driver is the length of guttering to be fitted, measured along the eaves, plus the number of downpipes carrying water to the ground. A simple rectangular house with two downpipes costs less to fit than an L-shaped roof with several valleys and four or five outlets, even if the total gutter length is similar.
Labour is charged by the hour once a job is small, from 39 €, with a minimum of one hour and 30-minute steps after that. Most straightforward houses need a fixed quote instead, because the crew needs to see the roof or photos first to price brackets, joints, and outlet positions properly.
A typical detached house in Harju county, with continuous eaves and two downpipes, usually falls somewhere between 400 € and 900 € fitted, depending on material and access. Larger or more broken-up rooflines push past that.
How the choice of material changes the total
Galvanised steel and plastic (PVC) gutters are the cheapest to buy and quickest to fit, and they cover most ordinary houses well. Powder-coated steel costs more but holds colour and resists dents better over the years, which matters on a house where the roofline is visible from the street.
Copper and zinc gutters sit at the top of the range, both in material cost and in the skill needed to join and solder them correctly. They are chosen more for period houses in Kalamaja and Nõmme, or where the client wants something that will not need repainting.
If we buy the materials on your behalf, a 10 % handling fee applies on top of the supplier price; buying them yourself and having us fit them is the cheaper route if you already have a supplier in mind.
Roof height and access change the price more than the gutter itself
A single-storey house with firm ground around it is quick work: a ladder, a helper, and the job is done in a few hours. A two-storey house, a steep roof, or a building with no clear access on one side needs scaffolding or a tower, and that adds both time and a separate cost.
Access also affects safety margins on windy days, which is common on Tallinn's coastal sites, and that can mean the work is scheduled around the weather rather than fitted into a single visit.
When you ask for a quote, mention the number of storeys, whether there is a flat area to stand equipment, and whether neighbouring buildings or fences restrict one side of the house. It changes the estimate more than most people expect.
What a quote usually includes, and what costs extra
A fixed quote normally covers the gutter sections, brackets, corner and end pieces, downpipes, and the labour to fit and align them with the correct fall towards the outlets. It should also include fitting or checking the fascia brackets that the gutter hangs from.
What is usually extra: replacing rotten fascia boards found once the old gutter comes off, fitting rainwater diverters or soakaways, and any scaffolding hire beyond a simple ladder. These get added to the quote once seen, not hidden in the final invoice.
- Gutter sections, brackets, corners and outlets
- Downpipes and clips down to ground level
- Correct fall and alignment along the eaves
- Fascia bracket check as part of the fit
- Extra: fascia board repair or replacement
- Extra: scaffolding or a lift beyond a ladder
Call-out fee and small extra jobs on the same visit
For work booked within Tallinn, a 25 € call-out fee applies and is deducted from the bill if the job goes ahead, so it costs nothing extra once the gutters are fitted. Larger installations further into Harju county are priced into the fixed quote instead.
It is often worth having the crew look at nearby jobs while they are up there with access already arranged, such as clearing debris from an adjoining roof valley or checking a neighbouring gutter run. If you manage a block or commercial building, our office and building maintenance service, from 49 € per hour, covers this kind of ongoing work outside single-house jobs.
What new gutters need once they are up
New gutters still fill with leaves, moss, and grit over time, particularly under birch or pine trees, which are common across Harju gardens. A clean every year or two keeps water flowing to the downpipes instead of overflowing at a joint or bracket.
Our gutter cleaning service, from 120 € per job, is separate from installation and is priced on its own guide, since it depends on roof size and how dirty the gutters have become rather than on fitting cost.
All work we fit carries a 24-month guarantee covering the installation itself, brackets, joints, and falls, though not damage from storms, falling branches, or gutters blocked by debris left unattended.
New gutter installation in Tallinn typically runs from a few hundred euros for a simple single-storey house to well over a thousand for tall or complex rooflines, driven mainly by length, material, downpipe count, and access.