What appliance installation costs during a full kitchen renovation
The Abimeister team · Updated · 5 min read
When a kitchen renovation reaches the final stage, someone has to connect the hob, oven, extractor, dishwasher and fridge, and get all of them working before the units go back against the wall. Doing this as one visit rather than five separate call-outs changes both the price and the practical order of work. This guide sets out what drives the cost of a multi-appliance installation in Tallinn, what is usually included, and what tends to appear as an extra line on the invoice.
How the price is built when several appliances are involved
Appliance installation is charged by the hour, from 39 € per hour with a minimum of one hour, then in 30-minute steps. A call-out fee of 25 € applies within Tallinn, but it is charged once per visit, not once per appliance. Fitting five appliances in one session means one call-out, not five.
This is the main reason bundling saves money. A dishwasher on its own might take an hour and a half including the call-out. Add a hob, oven, extractor and fridge to the same visit and the call-out cost is already covered, so every additional appliance only adds its own labour time.
For a full kitchen installed alongside the units, it often makes sense to price the whole job as one fixed quote rather than hourly. Kitchen installation is available from 600 € per job, and that figure can include appliance fitting if it is described up front, which removes the guesswork from the final bill.
What affects the time spent per appliance
A built-in oven or hob that slots into a pre-cut opening with existing connections nearby is usually the quickest job, often under an hour once tools are out. An extractor hood, especially one that needs ducting run through a cabinet or wall, takes longer and the time depends heavily on the duct route chosen at the design stage.
A dishwasher or fridge needs a water supply, a drain connection and a power socket all reachable from where the appliance sits. If the plumber and electrician placed these correctly during first fix, connection is quick. If a socket is missing or the water point is on the wrong wall, extra time goes into running a short supply line or asking an electrician to add a point first.
Access matters more than people expect. Fitting appliances into empty carcasses with no worktop yet installed is faster than working with a finished kitchen where cabinets already sit flush and cables have to be threaded in blind.
What is usually included and what costs extra
Included in a standard installation: unpacking and positioning the appliance, connecting it to existing water, drain and power points, levelling it, a basic function check, and removing the packaging. This applies whether it is one appliance or a full set fitted in sequence.
Extra work is anything that goes beyond connecting to what is already there. New ducting for an extractor, a new socket or a moved switch, an extended water line for a fridge with an ice maker, or fitting a plinth or filler panel around a built-in appliance all add hours to the job. Materials we supply carry a 10 % handling fee, or you can buy them yourself.
Electrical connections for hobs and ovens on their own circuit are done by a qualified electrician, which is worth mentioning if the previous kitchen had a different appliance layout and the wiring needs checking rather than just plugging in.
- Included: unpacking, positioning, connecting to existing supply points, levelling, basic function test
- Extra: new sockets or circuits, extractor ducting, extended water or drain lines, plinth and filler panel fitting
- Materials bought by us: 10 % handling fee, or you supply them
- One call-out fee per visit regardless of how many appliances are fitted that day
Is it worth booking all the appliances together or one at a time
For a full renovation, booking everything in one visit is almost always the cheaper route, because the 25 € call-out is paid once and the tradesman is already on site with tools out. It also means the kitchen is usable in one go rather than in stages over separate weeks.
Appliance installation on its own starts from 55 € per job, which suits someone replacing a single hob or dishwasher in an otherwise finished kitchen. That price makes less sense multiplied by five separate visits when the units are being fitted at the same time anyway.
The one case where separate visits make sense is when appliances arrive at different times, for example if a fridge is on back order while the rest of the kitchen is ready. In that situation it is worth asking for a quote that fits the actual delivery schedule rather than guessing.
What price range to expect
A single appliance connected to an already-prepared point, such as a dishwasher with the water and drain in place, typically falls in the 55–90 € range including the call-out. A hob or built-in oven fitted into a ready opening is similar.
A full set of five appliances fitted in one visit, with straightforward connections and no extra plumbing or wiring, usually lands around 180–320 €. Where an extractor needs new ducting or a socket has to be added, the total can run to 400 € or more.
For a full kitchen renovation where appliances are fitted alongside the units, a fixed quote covering the whole installation, from 600 € upward depending on size and layout, is usually the more predictable option and avoids surprises on the final invoice.
Fitting all your kitchen appliances in one visit means paying the call-out fee once, so it is almost always cheaper than booking each appliance separately.